Viser av varer
6,-
Merke: NAMZ
AMZ, FEMALE PINS FOR AMP MULTILOCK CONNECTORS pr stk Female crimp-on terminal pins for the female plug housing. Note: See 548202 for crimp tool. Note: See 548200 for the male terminal pin.
67,-
Modellnummer: 33900-59C
Merke: NAMZ
TERMINAL, NEUTRAL SWITCH Stock replacement push on style. Fits 33900-59C (MCS 904725) style neutral switches. Fits: > 59-64 FL; 73-E79 FX, FL; 80-97 FLT; 82-94 FXR; 86-97 Softail; 91-97 Dyna; 86-98 XL (NU)
5,-
Modellnummer: 73191-96
Merke: NAMZ
42,-
Modellnummer: 73152-96BK
Merke: NAMZ
NAMZ, AMP MULTILOCK CONNECTOR. BLACK, PLUG, 2-PINS Plug housing for female terminal pins. This is the OEM 2nd. series electrical connector style as mostly found on 96-00 H-D models. These small and compact connectors have been used on many applications including rear fender harnesses, front & rear turn signals, heated grip wiring, older main harnesses and speedometers. Excellent choice for an OEM style restauration and many other custom applications. Repl. 73152-96BK. Note: 548201 female crimp-on stamped terminal pins must be ordered separately. Note: See 548195 for the compatible 2-pin plug connector with male pins. Fits: >
32,-
Merke: NAMZ
Namz 4-Gauge solder-on battery lugs, 5/16" mount hole Seamless 100% copper with an anti-corrosion zinc plated layer. Eyelet type with solder-on cable system for a strong and reliable battery cable connection. - 5/16" / 7.94mm mount hole PR STK Fits: >
29,-
Merke: NAMZ
Namz 4-Gauge solder-on battery lugs, 1/4" mount hole Seamless 100% copper with an anti-corrosion zinc plated layer. Eyelet type with solder-on cable system for a strong and reliable battery cable connection. - 1/4" / 6.35mm mount hole PR STK Fits: >
58,-
Modellnummer: 73158-96BK.
Merke: NAMZ
AMZ, AMP MULTILOCK CONNECTOR. BLACK, PLUG, 8-PINS Plug housing for female terminal pins. This is the OEM 2nd. series electrical connector style as mostly found on 96-00 H-D models. These small and compact connectors have been used on many applications including rear fender harnesses, front & rear turn signals, heated grip wiring, older main harnesses and speedometers. Excellent choice for an OEM style restauration and many other custom applications. Repl. 73158-96BK. Note: 548201 female crimp-on stamped terminal pins must be ordered separately. Note: See 548199 for the compatible 8-pins plug connector with male pins. Fits: >
562,-
Merke: NAMZ
NAMZ, 24" HANDLEBAR WIRING HARNESS Oversized, 24" (61cm) long, handlebar wiring harness set. Fits approximately up to 20" apehanger handlebars. Color coded. Cut to length desired. For universal & custom applications. Fits: > 82-95 B.T. (excl. Bagger models) (NU)
252,-
Merke: NAMZ
NAMZ, braided flex sleeving. Black, 1/4" (6.35mm) ID 25ft. (7.6 meters) roll. Black braided flexible fabric wiring loom for electrical wiring. Dimensions mentioned are Inside Diameter.
Utsolgt
395,-
Merke: NAMZ
NAMZ, braided flex sleeving. Black, 3/8" (9.53mm) ID 25ft. (7.6 meters) roll. Black braided flexible fabric wiring loom for electrical wiring. Dimensions mentioned are Inside Diameter.
158,-
Merke: NAMZ
NAMZ, braided flex sleeving. Black, 1/8" (3.2mm) ID Description 25ft. (7.6 meters) roll. Black braided flexible fabric wiring loom for electrical wiring. Dimensions mentioned are Inside Diameter.
1.548,-
Modellnummer: NHCX-IS18
Merke: NAMZ
NAMZ HARNESS HNDLBR EXT INDIAN 21201057 / NHCX-IS18 Will allow the use for up to 20" tall handlebars Kit includes OEM color wire with pre-installed terminals, heat shrink and three OEM connectors Requires soldering Made in USA
134,-
Merke: NAMZ
NAMZ, connector intake air temperature sensor. 2-pin 2-position female plug. Repl. OEM 72247-95. Fits: > 95-05 fuel injected H-D models (NU)
202,-
Merke: NAMZ
Speedometer reset switch Trip meter reset switch. Replacement for OEM 67854-98. Note: See 990952 for the reset switch rubber boot. Fits: > Various models: 98-13 Big Twin; 11-13 XL Sportster; 11-12 XR1200; 02-17 V-Rod (NU)
778,-
Merke: NAMZ
NAMZ, handlebar wiring extension kit. +15" Extended wiring harness kit is for bikes where wider or higher handlebars are installed. OEM color coded and pre-attached wire ends for stock motorcycles. Includes 24 wires. Includes throttle extensions. Fits: > 96-06 FLT/Touring (NU)
559,-
Merke: NAMZ
NAMZ, handlebar wiring extension kit. +8" For bikes with CAN-bus / HDLAN wiring system. This extended wiring harness kit is for bikes where wider or higher handlebars are installed. OEM color coded and pre-attached wire ends for stock motorcycles. Note: Throttle extension, for e-throttle models, must be purchased separately. Fits: > 11-25 Softail; 12-17 (NU) Dyna; 14-22 (NU) XL