Viser av varer
19,-
Merke: MCS
3 used Fits: > 41-E84 B.T.; 47-73 45" SV(NU) pr.stk
42,-
Merke: JAMES GASKETS
Fits: > 65-E84 B.T.(NU)
9,-
Modellnummer: 11143
Merke: MCS
Retaining ring, clutch & brake lever pin / pushrod. PR STK Clutch & brake lever pivot pin & clutch release pushrod. OEM replacement reference 11143 Fits: > Clutch & brake lever pivot pin: 82-25 various Big Twin; 82-03 (NU) XL Sportster; 09-16 & 19-25 Trikes; 02-05 (NU) V-Rod; Clutch release pushrod with hydraulic actuated clutch: 17-20 FLT/Touring (NU)
10,-
Modellnummer: 11179.
Merke: JAMES GASKETS
Used in transmission end cover. Fits models with mechanical actuated clutch and models with hydraulic master cylinder. OEM replacement reference 11179. Fits: > 87-23 Softail; 91-17(NU)Dyna; 87-13 & 21-23 FLT/Touring; 14-16(NU)FLHR/C; 88-22(NU)XL; 08-12(NU)XR1200. Models with mechanical actuated clutch
1.082,-
Modellnummer: 37906-90
Merke: EASTERN PARTS
Fits: > 90-10 B.T. (NU) A-37906-90 EASTERN MOTORCYCLE PARTS BEARING CLUTCH HUB 90-10
84,-
Modellnummer: 37357-41
Merke: MCS
Clutch adjusting screw equipped with ball bearing for durability. Fits: > 41-E84 B.T. 4-speed(NU)
8,-
Merke: MCS
FOR CLUTCH RETAINER 501455; KICKSHAFT; STARTERSHAFT; CAM CHAIN TENSIONER Fits: >
6,-
Modellnummer: 11002.
Merke: MCS
RETAINING RING, CLUTCH RELEASE FINGER SHAFT OEM replacement reference 11002. Fits: > 70-86 4-speed B.T. (NU)
8,-
Merke: MCS
LOCK TAB WASHER, CLUTCH HUB NUT Fits: > 41-E84 FL, FX(NU) pr stk
28,-
Merke: MCS
Clutch hub. Fits: > 41-L84 FL, FX, FXST; L84-E85 FLT, FXR (NU) pris pr stk
539,-
Merke: MCS
Complete set that includes 25452-87A, 25453-87, 34920-86, 8873, 10998. - Also used on 82-85 Big Twin models when installing our 5-speed (#911046 polished, #900790 chrome) kickstart kits. For individual replacement parts as found in this kit see: - 995287 Clutch ramp inner. Repl. 25452-87A - 995387 Release ramp. Repl. 25453-87A - 992086 Release coupling. Repl. 34920-86A - 910998 Retaining rings. Repl. 10998 - 507830 Steel 3/8" balls, James. Repl. 8873. Or 531195 Steel 3/8" balls, S&S. Repl. 8873 (3 balls used in kit) Fits: > 87-99 B.T., Twin Cam
249,-
Modellnummer: 37975-41 (2487-41) and 37975-81
Merke: ALTO
Alto, clutch steel drive plate (each) With 3 anti-rattle buffers per plate, like the later 68-E84 models. The stock OEM style clutch of 41-67 early models use 3 steels (which were equipped with 2 buffers per plate) and 4 frictions, later 68-E84 models require 4 steels (which were equipped with 3 buffers per plate) and 5 frictions. Fhysical dimensions for 41-E84 models are all identical. OEM style replacement reference 37975-41 (2487-41) and 37975-81 Fits: > 41-E84 Big Twin (41-67 3 used, 68-E84 4 used) (NU)
1.239,-
Merke: MCS
Fits: > 98-06 B.T. (EXCL 2006 DYNA)(NU)
159,-
Modellnummer: 37285-70
Merke: MCS
CLUTCH PUSHROD 14" LONG Fits: > 70-E75 B.T.(NU)
621,-
Merke: MCS
With adjustable clutch hub retainer. Complete as shown. The full length Big Fix rollers increase clutch basket stability. especially with 3" open drives. The use of the stock clutch bearing retainer is no longer required. Comes with e-clip retaining rings, allowing clutch hub adjustments by using the 3-different depths in the counterbored nylon retainer. Fits: > 41-E84 B.T.(NU)
1.579,-
Merke: BARNETT
INCL. 6 FRICTION DISCS Fits: > LFRICTIONS ONLY (6 PLATES) Fits: > 84-89 B.T.(NU)(NU)