VANCE & HINES
1.119,-
Merke: VANCE & HINES
Optional baffle. Deep rumble but extra quiet. Fits BigShots Staggered, BigShots Longs, BigShots duals, StraightShots HS slip-ons, StraightShots, LongShots HS, Softail Duals, SideShots, ShortShots Staggered Pris pr stk
1.172,-
Modellnummer: 559171
Merke: VANCE & HINES
Optional baffle. Deep rumble but extra quiet. Fits BigShots Staggered, BigShots Longs, BigShots duals, StraightShots HS slip-ons, StraightShots, LongShots HS, Softail Duals, SideShots, ShortShots Staggered Fits: >
7.819,-
Modellnummer: 562873
Merke: VANCE & HINES
Matte black ceramic with chrome end treatment. One of the best ways to ease into customizing is with the addition of a slip-on muffler set. These Twin Slash Rounds mufflers will give the unmistakable Vance & Hines look and open up the performance potential of your bike and ready for later engine upgrades, if desired. The low restriction louvered core baffles are pre-installed. Included are virtually invisible 3 inch full coverage heat shields which makes the 2-1/2" diameter muffler bodies blue-proof. Note: See 568712 for stock replacement baffle. Note: See 981790 for competition baffle (+2 to +3 dB). Note: See 981791 for optional quiet baffle (-3 to -4 dB). Fits: > 18-20 Softail FXBB Street Bob, FLSL Slim, FXLR/S Low Rider, FLFB/S Fatboy, FXBRS Breakout 114
9.969,-
Modellnummer: 981605
Merke: VANCE & HINES
Matte black ceramic. The unmistakable slash cut ends on this exhaust system makes it different from the regular Shortshots. The deep hot rod roar shows everybody there is more to this system than good looks. Stepped headers from 1 3/4" to a 2 1/2" muffler body and 220° coverage full length heat shields that are almost invisible. Note: See 981157 for stock replacement baffle with billet tip. Note: See 981423 for optional quiet baffle. Note: See 559171 for optional extra quiet 'Super Q' baffle. Fits: > 04-13 XL (NU)
6.979,-
Merke: VANCE & HINES
The latest in digital communication with your bike's fuel injection system is done via bluetooth with your smartphone, either Android or iPhone. Flash technology is used to recalibrate the OEM fuel map. The OEM fuel map will be stored in the FP3 so the ECU can always be returned to OEM factory condition. Stationary manual adjustments will let you adjust the fuel map, EITMS (Engine Idle Temperature Management System) and idle speed, AFR (Air Fuel Ratio) can be set slightly richer or leaner. Ignition timing can be adjusted and includes a rev limiter. New maps can be downloaded from Vance & Hines and through the on-bike sensors the system can be run in AutoTune mode, which enables the bike to recalibrate the fuel map real time to the specific conditions and even the quality of fuel that is used. When the Android or iPhone is installed on the bike, live sensor data, like speed, RPM, cylinder head temperature, voltage, gear selection etc. can be seen on the display of the smartphone. Note: Once the FP3 is used on a bike it is 'mated' to that specific OEM ECU. You will not be able to use the same FP3 on another bike. The OEM fuel map is stored in the FP3, therefore the ECU can always be returned to the OEM factory set-up. Note: See 573672 for the optional, dealer orientated, 'Fuelpak Pro Wideband Tuning kit'. Used for additional tuning options. Fits: > 07-10 Softail (excl. 07-10 CVO); 07-11 Dyna (excl. 07-11 CVO); 07-13 Touring (excl. 07-08 CVO); 07-13 Sportster; 08-12 XR1200 (NU)
3.859,-