Viser av varer
656,-
Modellnummer: 18534-29A
Merke: JIMS
JIMS, 29-85 TAPPET ROLLER REPAIR KIT Complete reproduction tappet rollers with needle bearings and axles. Repl. 18534-29A. Tech tip: Tappet rollers / Cam follower rollers can fail, without warning, and spill needles of the bearing into the engine. This may result in severe engine damage to breather valve, cam, pinion gear, oil pump drive gears, oil pump, tappet blocks, crankcase etc. To avoid this install new tappet assemblies or a tappet roller repair kit on a 'regular' base, like each 60.000km or so, or with each overhaul. The cost of new set of rollers can be minor when compared to the total cost of just one failing tappet roller spilling its needle bearings into your engine. Fits: > 29-85 all H-D models (excl. Evo) (NU)
1.027,-
Merke: JIMS
JIMS, Extra Grip tool driver spacer Optional for use with all JIMS 2-piece bearing race tools; Applies outwards force for better tool grip on the race when it is removed
1.945,-
Merke: JIMS
JIMS, steering head bearing race tool Two-piece design; Used to install & remove the races in the frame neck or in the frame cup; The optional 978339 X-tra grip driver spacer fits between both tool pieces, providing outward force, to prevent any tool-slip from the bearing race during the removal action Note: Order 920542 JIMS driver handle separately Note: X-tra grip driver available as 978339 Fits: > 49-24 Big Twin (Excl. 14-up Touring, Trike); 21-24 RA1250 Pan America models; 21-24 RH 1250/975 models; 78-22 (NU) XL Sportster; 87-02 (NU) Buell
614,-
Modellnummer: 33288-37 / 2127-37A
Merke: JIMS
JIMS, KICKSTART SHAFT BUSHING AND O-RING KIT. STD SIZE Standard .940" Outside Diameter. OEM replacement reference 33288-37 / 2127-37A 2stk Fits: > L37-86 4-speed B.T. with kickstart (NU)
629,-
Modellnummer: 35094-31 (2297-31) 35094-65
Merke: JIMS
JIMS BUSHING, TRANSMISSION MAIN DRIVE GEAR OEM replacement reference 35094-31 (2297-31) and 35094-65 Fits: > 41-86 4-speed B.T. (NU)
767,-
Merke: JIMS
JIMS OIL PUMP DRIVE SHAFT KIT Fits: > 70-99 B.T.(EXCL. TC)
659,-
Merke: JIMS
JIMS, camshaft needle bearing. Inner 2 pk Full needle style bearing. 2 bearings used for Twin Cam. 1 bearing used for M8. OEM replacement reference 9215 (non-full needle), 9298A (full needle), 9298B (full needle). 24018-10 SE upgrade full needle bearing set as standard for some 110" Twin Cam models. Fits: > 06-17 (NU) Dyna; 07-17 (NU) Twin Cam Softail (Excl. 110" Twin Cam as noted); 07-16 (NU) Twin Cam Touring; 18-24 M8 Softail; 17-24 M8 Touring, Trike
Utsolgt
798,-
Modellnummer: 26346-36
Merke: JIMS
JIMS OIL PUMP DRIVE SHAFT Fits: > 36-67 B.T.(NU)
1.799,-
Merke: JIMS
2.159,-
Modellnummer: 23310-82A
Merke: JIMS
Manufactured from aerospace quality steel and CNC machined to the JIMS standard. Note: JIMS breathers can be used with L79-99 style steel breather valve thrust washers. Fits: > L77-99 B.T. (excl. Twin Cam) (NU)
440,-
Merke: JIMS
JIMS, needle bearing camshaft. 'Full needle' When still present it is advised to replace the low cost OEM needle bearing in 92-99 Evolution Big Twin models marked 'INA SCE 138 USA' with a 'full needle' bearing to increase reliability. Especially important when using higher lift cams, which increases stress in the camshaft bearing. Fits: > 58-99 B.T. (excl. Twin Cam) (NU)
1.879,-
Merke: JIMS
Adequate axle retention is important, especially for high performance bikes. This kit includes end caps and a very strong axle nut washer which also helps prevent swingarm distortion. Fits: > 80-02 FLT/TOURING; 82-94 FXR(NU)
1.684,-
Modellnummer: 978534
Merke: JIMS
Performance battery cables with 1666 individual cable strands for extreme flexibility. Lugs are manufactured with 99% pure copper with a 24K gold plating to maximize conductivity. Contains 2 battery cables: 1x 11" long, 1x 16" long Fits: > 81-03 XL models (NU)
419,-
Merke: JIMS
Fits: > L58-90 XL (NU) SELGES PR STK.
1.069,-
Modellnummer: 978377
Merke: JIMS
Used to install the swingarm in a 5-speed rubber mount frame; Tool will spread bushing assembly Fits: > 80-01 FLT/Touring; 82-94 FXR (NU)