FULLY AUTOMATIC 1 AMP BATTERY MAINTAINER
Battery Range: 6V: 12Ah
12V: 32Ah
Recommended for: Motorcycles, lawnmowers, four-wheelers, classic cars (6V)
SPI 6/12V-1A Battery Charger
Specifications subject to change without notice.
DC Voltage 6/12V
Nominal AC Voltage 230VAC – 50Hz
Max. charging current 1A
Dimensions (mm) 145 (L) x 90 (W) x 45 (H)
Weight 0.4 kg
Multilingual digital display No
Aeration system No
Battery Type AGM, Standard, Gel, Calcium, Start/Stop
Fuse 7.5A
IP Rating IP54
CTEK, COMFORT INDICATOR PIGTAIL
Plugs into any SAE connector and allows a CTEK 'Comfort Connect' style connector to be used on the other end. Equipped with a 3-LED quick battery status indication system, which has a very low power consumption allowing +2 years of use before the battery is drained. Comes with a protective cap on the 'Comfort Connect' CTEK connector side for adequate protection during permanent on-bike use.
Fits: >
CTEK XS 0.8 / 12V-0.8A
Passer bra til MC, Moped, Vannscooter, ATV og Gressklippere.
XS 0.8 er en kompakt og helautomatisk seks trinnlader for 12V-batterier fra 1,2 til 32Ah, og for vedlikeholds lading av inntil 100Ah.
Spesifikasjoner:
- Kompakt, kraftig 12V ladning
- XS 0.8 har avansert teknologi for lading av små batterier på motorsykler, jetski, ATV-er og gressklippere.
- XS 0.8 er CTEKs minste 12V lader og er egnet for lading av mindre batterier og vedlikeholdslading av bilbatterier i normal størrelse.
- Den er enkel i bruk, og du kan følge hele ladeprosessen på det klare, lettleste displayet.
- Helautomatisk "koble til og glem" 6-trinns lading
- Patentbeskyttet vedlikeholdslading opptil 100Ah for lengre batterilevetider
- Lader 12V batterier fra 1,2-32Ah
- Patentbeskyttet avsulfateringsfunksjon
- Grå IKKE til litium batterier
'The INDICATOR – Eyelet connector'. 50cm long wiring. Used to quick-connect the charger to the battery. It comes with two 6.4mm diameter eyelets that are permanently connected to the battery. The other end comes with the standard CTEK 'Comfort Connect' connector equipped with a 'traffic light' LED indicator system to provide you with a quick battery status indication. When the time comes to charge, just plug the charger in!
Fits: >
TECMATE OPTIMATE 6, SELECT BATTERY CHARGER
With EU wall plug. 9-step 12V 5Amp charger for 12V starter and deep cycle Lead Acid, AGM, GEL & deep cycle 12V batteries from 3 – 240Ah. Perfect for accurate temperature controlled charging and unsupervised safe long term maintenance. - Charge – 14.4V for STD batteries / 14.7V for premium AGM or Deep Cycle voltage selectable - Charging Amps: 5A (Ampmatic) - AmpMatic charge control: adjusts current to suit any battery size (3Ah to 240Ah) or condition for fastest and most complete charge - 'Power Supply' mode (13.6V) delivers stable power for vehicle system reprogramming, show room vehicle demo or retaining memorised settings when battery cables are disconnected to fit powered accessories or replace the battery - Save: Low Volt Start of 0.5V (12V) + 2-step safe pulse recovery - For Lead Acid, AGM & GEL (3Ah to 240Ah) - Input: Global (100-240V 50-60Hz), high efficiency (CEC listed), fully sealed - Weatherproof case with wall mounts - Incl. with 6ft / 180cm AC supply lead and 6ft / 180cm charge lead ending in SAE connector. Weatherproof battery lead & standard battery clip set included - No risk of overcharging - Sparks suppressed - Safe for vehicle electronics - Safe for long-term battery maintenance - Automatic shut-down if short-circuited or battery disconnected
Fits: > Universal
'The CONNECT - Clamp' is a 46cm long practical, quick and easy way to connect your CTEK charger to your battery. Perfect for moving your charger quickly between different batteries in workshops or showrooms. Comes with CTEK's 'Comfort Connect' connector to fit all CTEK products.