S&S
18,-
Modellnummer: 50-8096
Merke: S&S
S&S O-RING, EJECTOR NOZZLE S&S SUPER E&G ACC. PUMP (1 USED) Fits: >
30,-
Modellnummer: 50-0034
Merke: S&S
S&S E/G.(3 USED) S&S B/D (4 USED) (10-24 X 3/4") Pris pr stk
819,-
Merke: S&S
INCL. GASKETS, O-RINGS, BELLOWS SEALS, ACC. DIAPHRAGM/SPRINGS/BALLS, FLOATBOWL NEEDLE Fits: > SUPER E/G CARBS
91,-
Modellnummer: 507622
Merke: S&S
Thinner than stock seals. All S&S manifolds require thinner than stock manifold the head seals to compensate for the larger S&S port diameter. Thicker stock seals may damage S&S manifolds. Fits: > 84-17(NU)B.T. (excl. M8); 86-20 XL; 08-12(NU)XR1200. With S&S manifold Selges pr stk.
629,-
Modellnummer: 531826
Merke: S&S
EXTRA THICK. S&S MANIFOLD TO OEM CV CARB (WILL NOT FIT OEM CV MANIFOLD) Fits: >
19,-
Modellnummer: 50-8016
Merke: S&S
S&S, CARBURETOR TO MANIFOLD O-RING. SUPER E Fits between carb and manifold and/or manifold spacer block. Fits S&S Super E carbs. Fits: > S&S SUPER E (ALSO FITS S&S SUPER E SPACER BLOCK) pr stk
19,-
Modellnummer: 50-8100
Merke: S&S
FITS ACC. PUMP CAP (2 NEEDED) Fits: > Pris pr stk
41,-
Modellnummer: 977885
Merke: S&S
S&S FLOAT PIN E/G CARBS (EXCL. B/D CARBS) PRIS PR STK Fits: >
245,-
Merke: S&S
S&S, FLOAT BOWL NEEDLE (WIRE-DESIGN) Late style 'wire' design. As used from 1983-up. Note: Check your S&S carburetor before ordering. 977818 (early style forked design) or 977828 (late style wire-design) Fits: > S&S B, E, G and 2-throat carburetors
829,-
Merke: Kustum-Tech
KUSTOM-TECH, ENRICHMENT DEVICE. 'TULIP STYLE' Used on Super B/E/G carbs where the OEM teardrop is replaced by an air horn or custom air cleaner that does not support the stock S&S B/E/G enrichment system Fits: > H-D with S&S Super B; Super E/G with non-stock air cleaner
717,-
