BDL
3.116,-
Modellnummer: 12040113
Merke: BDL
For 32-68T ratio Fits: > 09-22 all Touring
Utsolgt
14.509,-
Merke: BDL
BDL, BILLET CAM COVER FOR TWIN CAM Billet polished aluminum. This kit converts Twin Cam engines so an Evo style electronic ignition can be used. Compatible with aftermarket ignition & rotor cup system. It will give you the possibility to wire the Twin Cam ignition as it were an Evolution. Great solution in custom set-ups. Note: Compatible with gear driven cams only. Note: Ignition with a thick module case need a spacer to mount the timing cover For replacement parts see: 515187 Cam end adapter, 515188 Cam end bolt, 515189 Seal. Fits: > 01-17 Twin Cam; S&S T-series engines. (With gear driven cams only)
1.289,-
Merke: BDL
BDL, REPL. PRIMARY BELT. 1-1/2", 132T+ (PLUS), 8MM PITCH This is the so-called '+' belt. For the '-' belt see 506915. Note: The difference in belts between 65-78 and 78-83 FL, FX models is due to a minor difference in primary housing length. Available belts are therefore designated as a - (minus, slightly shorter / MCS 506915) or + (plus, slightly longer / MCS 970974) belt, although the number of teeth is identical. Fits: >
Utsolgt
172,-
Merke: BDL
Designed to withstand operating temperatures of over 600 degrees F. (318 °C). Very 'sticky' to help prevent fly off. Fits: > 41-E84 B.T.(NU)
Utsolgt
1.179,-
Merke: BDL
BDL, 40MM DOUBLE ROW CLUTCH HUB BEARING For ETC and Competitor clutch hubs. Fits: >
14.999,-
Merke: BDL
94-05 Dyna, 94-06 Softail
4.019,-
Merke: BDL
Fitments 79-84 FX Shovel, 84-86 Softail Note: Only 4-speed Models Description Precision machined out of aluminum and then hard anodized Motor shaft pulleys come with nut and washer (unless noted) Made in the U.S.A.
409,-
Modellnummer: 507686
Merke: BDL
Fits backside of inner primary cover Fits: > 79-E84 FLT; 82-E84 FXR(NU)
1.289,-
Merke: BDL
BDL, REPL. PRIMARY BELT. 1-1/2", 132T- (MINUS), 8MM PITCH This is the so-called '-' belt. For the '+' belt see 970974. Note: The difference in belts between 65-78 and 78-83 FL, FX models is due to a minor difference in primary housing length. Available belts are therefore designated as a - (minus, slightly shorter / MCS 506915) or + (plus, slightly longer / MCS 970974) belt, although the number of teeth is identical. Fits: >
Utsolgt
11.978,-
Merke: BDL
1 1/2" 11 mm Bolt-In Belt Drive Kit 31 Tooth Front/47 Tooth Rear, 99 Tooth 1 1/2" Belt 65 Panhead, 66-79 FL Shovel, 80-84 FLH, 80-84 FLHC, 80-84 FLHS, 82-84 FLHP, 83-84 FLHT, 83-84 FLHTC, 83-84 FLHTP, 71-81 FX Shovel, 82 FXB Sturgis, 82-84 FXE, 82-84 FXEF, 82 FXS, 82-84 FXWG, 83 FXDG, 83-84 FXSB Note: For Electric start Models only.
Utsolgt
10.559,-