Incl. 2 sealed ball bearings. Approx. dimension: 1" (19.05mm) I.D x 52mm OD x 21mm wide. Replacement for OEM 9267. Note: These All Balls Racing bearings are high quality high speed wheel bearings. Manufactured to ABEC 3 precision levels. Bearings are lubricated with a Chevron fabricated high performance, high temperature grease of SRI 2 level that contains anti-rust and anti-oxidation additives. Compatible with temperatures of -20°C to +150°C and rotational speeds in excess of 10.000 RPM. Triple lip seals are used to help prevent water and debris entering the bearing.
Fits: > 00-06 Softail (front); 00-07 Softail (rear); 07-08 Springer (front); 2007 Springer (rear); 00-03 FXD (front/rear); 00-07 XL (front); 00-04 XL (rear) (NU) Pris for 2 stk
Styrehodelagersett. Settet inkluderer et sett med øvre og nedre lager, løper og tetninger. Pakningene er OEM-utstyr, som brukt på 01-up-modeller, holde fett inne og vann/smuss ute enn de tidlige støvskjoldene av metall.
ALL BALLS,
Passer til: > 49-20 B.T. (ekskl. 14-20 Touring, Trike) og 82-20 XL; 02-17(NU)V-Rod; 95-10(NU)Buell XB
Front wheel pack. Incl. 1 non-ABS and 1 ABS bearing. Replacement for OEM 9276A and 9252. Note: These All Balls Racing ball bearings are high quality high speed wheel bearings. Manufactured to ABEC 3 precision levels. Bearings are lubricated with a Chevron fabricated high performance, high temperature grease of SRI 2 level that contains anti-rust and anti-oxidation additives. Compatible with temperatures of -20°C to +150°C and rotational speeds in excess of 10.000 RPM. Triple lip seals are used to help prevent water and debris entering the bearing.
Fits: > - Front & rear: 08-23 Softail. FLS, FXSW; 08-17 all Dyna; 21-23 RH Sportster; 21-23 RA Pan America; 08-17 V-Rod with 25mm front axle - Front: 08-23 FLT/Touring
2-pack; Non-ABS bearing; On ABS models on opposite side of sensor; 25mm I.D. x 52mm OD x 15mm wide; Repl. for OEM 9276A. 92760B. Note: These All Balls Racing bearings are high quality high speed wheel bearings. Manufactured to ABEC 3 precision levels. Bearings are lubricated with a Chevron fabricated high performance, high temperature grease of SRI 2 level that contains anti-rust and anti-oxidation additives. Compatible with temperatures of -20°C to +150°C and rotational speeds in excess of 10.000 RPM. Triple lip seals are used to help prevent water and debris entering the bearing.
Fits: > 07-21 various H-D models; 2021 Sportster S; 08-17(NU)all V-Rod
9276A
9276B
All Balls Racing, wheel bearing set 1" (25.4mm) ID
Incl. 2 x sealed ball bearing. Dimensions approx. 1" ID x 52mm OD x 21mm wide. OEM replacement reference 9247. Note: These All Balls Racing bearings are high quality high speed wheel bearings. Manufactured to ABEC 3 precision levels. Bearings are lubricated with a Chevron fabricated high performance, high temperature grease of SRI 2 level that contains anti-rust and anti-oxidation additives. Compatible with temperatures of -20°C to +150°C and rotational speeds in excess of 10.000 RPM. Triple lip seals are used to help prevent water and debris entering the bearing.
Fits: > 00-07 FLT/H (front/rear); 04-07 Dyna (front/rear); 02-07 V-Rod with 1" axle (front/rear); 05-07 XL (rear). (NU)
For HSR 42/45, Mikuni
ntended for closed-course racing only
NBR rubber material is used on all O-rings and rubber gaskets - NBR has excellent resistance to the ethanol used in today's fuels
Includes all gaskets (including spigot body), O-rings, float bowl, carburetor cap, spigot body screws, fuel mixture screw (with spring, washer and O-ring), float needle valve with FMK tip, and accelerator pump boot
Includes a 10/32" starter mount bolt. 1.7kW with an offset gear reduction system, for the best of both worlds. This will allow you to start most bikes high compression engines. Note that this higher capacity starters will require a battery that supplies enough power for the starter to live up to its high kW potential. All Balls starters are manufactured in the USA and Canada.
Fits: > 89-06 B.T.(NU) (EXCL 2006 DYNA)