KOSO, HD-05 SPEEDOMETER / TACHOMETER. CAN-BUS
Black face, chrome bezel. Replacement for the later 4.5 (11.43cm) diameter tank mounted H-D speedometers. Connects plug & play to the existing wiring and is fully compatible with the bike's CAN-bus system. Offers speedometer (kmh/mph), tachometer, odometer, two trip meters, rev limit setting, shift light, multiple color backlights, gear indicator, engine temperature, battery voltage, fuel level indicator, average fuel consumption and more. - 12V DC. CAN-bus compatible - Multiple color backlight: Red / Orange / Yellow / Green / Blue / Indigo / Purple / White - Backlight brightness: 5 levels - Speedometer: 0 to 360 km/h (0 to 225 mp/h) - Display delay : < 0.5 seconds - Odometer: 0 to 999.999 km (miles) - Trip meter A/B: 0 - 9,999.9 km (miles) with auto reset after 9.99.9 km (miles) - Tire circumference adjustment: 50 to 210%, per 1% - Gear indicator: Off / Neutral and 1 - 6 gear - Tachometer: 0 to 8,000 rpm - Rev limit light: 2,000 to 8,000 rpm. Warning light flashes when set rpm is exceeded. Sets per 100 rpm - Maximum speed warning adjustable (light or flash) - Engine temperature warning: 40 - 215 °C (40 - 419 °F) adjustable - Fuel gauge: 6 levels - Tank volume: Off / 1 to 9.9 gallons (approx. 3.8 to 37 liters) - Average consumption fuel consumption: Off / liters per 100 km per liter / Miles per gallon (US spec) / miles per gallon (UK spec) - Clock: 12h / 24h - Volt meter: 8-18 V DC - Maintenance intervals: Off / 500 to 16,000 km (300 to 10,000 miles). Sets per 100km (miles) - Fuel reserve: 0 to 9.999 km (miles). When range is less than 10 miles (16 km) 'LO RNG' warning will appear on display - Indicator lights: RPM warning, fuel reserve, engine check, low voltage, anti-theft devise, cruise-control - Works in: 14 to 140 °F (10 to 60 °C) - Required voltage DC 12 V - Confirm JIS D 0203 S2 - Dimensions: (D x W) Ø 45/8 x 13/4 ”(Ø 117 x 45 mm) - Weight: 208.5 gram (7.36 oz.)
Fits: > 11-17 Softail; 14-19 FLHR; 12-17 FXDWG (NU)
Quick clamp-on / off style grip heaters. No special or complicated heated grip set installation required. Use them when needed, remove them when not. Easily connects to any regular USB port of 2.1A output or higher. - Dimensions: 94 mm x 34.7 mm - Works with grips with 31 to 35 mm diameter - Working voltage: DC 5 Volt - Consumed Power: 10 Watt - USB port recommended specs: Output above DC 5 V / 2.1A - IP Level: IP54 (non-waterproof) - Effective working range: -10 to +60°C - Weight: approx 86 grams - Wiring length: approx. 73cm
Fits: > Universal
KOSO NORTH AMERICA
HEATED GRIP X CLAW USB
06310265 / AX120000
Heated devices for the user that does not want to commit to changing their grips but still want to maintain the comfort of heated grips
Easy plug and play USB power source (5V)
Single heating level requires 10W minimum
Universal fit to be clipped on any handlebar sizes (grip diameter between 31 mm and 35 mm)
Rubber material that is resistant to outdoor conditions and high temperatures
Thin and flexible silicone wires make them easy to install