TRW
6,-
Merke: TRW
Crush washers used in combination with a banjo bolt and banjo fitting. TüV approved Fits: > pris pr stk
419,-
Modellnummer: 517717
Merke: TRW
ØKOLOGISK; PASSER '125X4R', '125X4RSPH' OG '137X4B' PM KALIPER; PASSER OGSÅ PASSER 983001 OG 983004 RST-CALIPER (2 klosser til en 4-P CALIPER) Passer til: >PM og litt EXIL
297,-
Merke: TRW
TüV approved. Hydraulic switch inside the banjo bolt. Perfect to trigger the rear brake light.
Utsolgt
778,-
Merke: TRW
Chrome. ABE approved. Approx. dimensions. 930mm wide. 260mm high. 150mm pullback. 260mm Center width. Fits: > Pre-81 H-D with 1" I.D. risers
299,-
Merke: TRW
This comes with approval. Hydraulic switch inside the banjo bolt. Perfect to trigger the rear brake light. Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report. Fits: >
1.628,-
Merke: TRW
SPOKE DESIGN; FRONT; LEFT AND RIGHT Fits: > 00-14 Softail; 00-05 Dyna; 00-07 Touring; 00-13 XL; 08-12 XR1200
104,-
Modellnummer: 510488
Merke: TRW
TüV approved, 7/16"-24 UNF. Note: please use the torque values as mentioned in the assembly manual. Fits: > Universal
429,-
Merke: TRW
TRW, Classic bar ends for 22mm aluminum handlebars. Black Black aluminum handlebar weights to help reduce handlebar vibration. Compatible with 22mm (7/8") outside diameter aluminum handlebars. 2 stk Fits: > For 22mm aluminum handlebars
97,-
Merke: TRW
Length 23mm below head. TüV approved. Note: please use the torque values as mentioned in the assembly manual. Fits: > Universal
97,-
Merke: TRW
Length 23mm below head. TüV approved. Note: please use the torque values as mentioned in the assembly manual. Fits: > Universal
1.658,-
Merke: TRW
SPOKE DESIGN; REAR; LEFT & RIGHT Fits: > 00-21 Softail (excl. 2017 FXSE); 00-17(NU)Dyna (excl. FXDLS); 00-07(NU)Touring; 00-10(NU)XL
1.654,-
Modellnummer: 500759
Merke: TRW
SWING DESIGN; FRONT LEFT Fits: > 00-14 Softail; 00-05 Dyna; 00-07 Touring; 00-13 XL; 08-12 XR1200 (NU)
96,-
Merke: TRW
Length 33mm below head. TüV approved. Note: please use the torque values as mentioned in the assembly manual. Fits: > Universal
1.134,-
Merke: TRW
1" Ape Hanger Handlebar Non-Dimpled Chrome 1" Fitments 81-03 Sportster, (except 96-98, 04-16 XL1200C, 96-98 XL1200S, 98-03 XL53C, 04-07 XL1200R, 04-09 XL883), 91-05 Dyna, 89-94 FX Model, 90-16 Softail, 84-89 FXST, 87-89 FXSTC, 88-89 FXSTS, (except 08-11 FLSTSB, 08 FXCW, 08-11 FXCWC, 08 FXSTSSE2, 09 FXSTSSE3, 10-12, 14-16 FLSTFB, 10 FLSTSE, 11-12 FXS, 11 FLSTSE2, 12, 14-16 FLS, 12 FLSTSE3, 13 FLSTFB 103, 13 FXS 103, 13-14 FXSBSE, 13 FLS 103, 14-16 FXSB, 14-15 FLSTNSE, 16 FLSS, 16 FLSTFBS, 16 FXSE, 03 FXSTDSE, 04 FXSTDSE II, 05 FLSTFSE, 06 FLSTFSE2, 07 FXSTSSE), 78-84 FXE, 81-82 FXS, 81-82 FXB Sturgis, 74-84 FLH
739,-