Eksosanlegg
112,-
Modellnummer: 65324-83
Merke: JAMES GASKETS
late' 91-09 conical style. Note: The 86-03/10-up style is preferred by many for better flow characteristics. Note: The 91-09 late style is a conical shaped gasket that was introduced by The Factory in 1991 and replaced, again, with the early style in 2010. Note that the early style will fit all models and is generally seen as the better gasket design. JAMES. 65324-83 Fits: > 84-20 B.T.; 86-20 XL; 08-12(NU)XR1200; 87-10(NU)Buell XB Selges Pr Stk
29,-
Merke: JAMES GASKETS
JAMES, FLANGED HEX NUT, EXHAUST MOUNT Zinc plated. Heavy Duty. 5/16-24 threaded. Pris pr stk Fits: > Exhaust to head: 84-23 B.T.; 86-22(NU)XL; 08-12(NU)XR1200; 87-10(NU)Buell XB models
69,-
Modellnummer: 65324-83
Merke: JAMES GASKETS
Fits: > 84-20 B.T.; 86-20 XL; 08-12(NU)XR1200; 87-10(NU)Buell XB 65324-83 Selges Pr Stk
46,-
Merke: JAMES GASKETS
JAMES, EXHAUST STUDS Pris pr stk 5/16-18 to 5/16-24 X 1-11/16". Note: Exhaust studs as used in the M8 engine (OEM 10900015) are of a slightly different design, with a small protruding hex-shaped outer-end to aid initial stud-installation, but these early Evo/Twin Cam style studs will still fit. Fits: > 84-23 B.T.; 86-22(NU)XL; 08-12(NU)XR1200; 87-10(NU)Buell XB models
69,-
Merke: MCS
Two used on FLT/Touring models. OEM reproduction replacement rubber. Note: See 945050 for replacement steel exhaust hanger bracket. Fits: > L85-22 FLT/Touring; 1986(NU)FXRD only
67,-
Modellnummer: 65325-83A
Merke: JAMES GASKETS
JAMES RETAINING RINGS, EXHAUST FLANGE 2 pk Used in combination with OEM style exhaust flanges to install head pipes to cylinder heads. OEM replacement reference 65325-83A Fits: > 84-25 Big Twin; 86-22 (NU) XL Sportster; 08-12 (NU) XR1200; 87-10 (NU) Buell XB; 07-up S&S X-Wedge engine
379,-
Merke: DRAG SPECIALTIES
Features a narrow design with a low-profile head Secure exhaust heat wraps or can be used any place extra clamping is needed in extreme temps or conditions Made in the U.S.A. 4 pk.
54,-
Modellnummer: 65835-68T. 65834-68A
Copper faced exhaust gasket with copper fire ring. Better heat resistance than its 'paper with copper fire ring' counterpart. OEM replacement reference 65834-68A, 65835-68T. Fits: > 66-84 Shovelhead
224,-
Merke: JAMES GASKETS
Paper gasket with copper fire ring. Used on S.T.D. Development (Lou Trachtenberg Development) Shovel, Pan and Pan/Shovel cylinder heads with 3-bolt exhaust mounting flanges. Fits: > H-D with 3-bolt S.T.D. Development heads 2 pk.
373,-
Modellnummer: 160-1112-D
Merke: DRAG SPECIALTIES
Heavy-duty 1,200°F muffler packing 11" x 16" x 1" thick Can be split in half to allow for double use Made in the U.S.A.
109,-
Modellnummer: 980416
Merke: MCS
Sensor plug 2stk. made from zinc plated steel. Fits 18mm x 1.50 sensor bungs. Required with non-O2 (oxygen) sensor equipped 86-up H-D models that have an exhaust system installed with stock threaded sensor plug holes. Can also be used on H-D models when O2 sensors are no longer required.
139,-
Merke: MCS
Chrome plated universal middle clamp, made from steel, with an 1-3/4" (4.4cm) inside diameter and without mount strip. Fits: > Universal
152,-
Modellnummer: 66723-85
Merke: MCS
Two used on FLT/Touring models. OEM reproduction replacement. Note: See 945051 for replacement muffler hanger rubber. 66723-85 Fits: > L85-22 FLT/Touring; 1986(NU)FXRD only
1.551,-
Merke: VANCE & HINES
Optional baffle. Deep rumble but extra quiet. Fits BigShots Staggered, BigShots Longs, BigShots duals, StraightShots HS slip-ons, StraightShots, LongShots HS, Softail Duals, SideShots, ShortShots Staggered Pris pr stk
1.551,-
